| No. | Brand | r | S | e | m | D | J | A | L |
| 2309 | NKE | - | - | - | - | - | - | - | - |
| 2209 | Toyana | - | - | 0.37 | - | - | - | - | - |
| 1312K+H312 | Toyana | - | - | - | 500 mm | - | - | - | - |
| 2216 | KOYO | - | - | 19 mm | - | - | - | - | 86 mm |
| 1312K | Toyana | - | - | - | - | - | - | - | - |
| 2215-K+H315 | NKE | - | - | - | - | - | - | - | - |
| 2320 K | ISB | - | - | - | - | - | 49 mm | - | 70 mm |
| 2208 K | NSK | - | - | - | - | - | - | - | 129 mm |
| 1217K+H217 | Toyana | - | 11 mm | - | - | - | - | 54 mm | - |
| 2207E-2RS1TN9 | SKF | - | - | - | - | 62 mm | - | - | - |
| 1311EKTN9 | SKF | - | - | - | - | - | - | - | - |
| 1222 K | NSK | - | - | - | - | - | - | - | 125 mm |
| 1306SK | NTN | - | - | - | - | 160 mm | - | - | - |
| 2310EEG15 | SNR | - | 15.9 mm | - | - | - | - | - | - |
| 1302 | NSK | - | - | - | - | - | - | - | - |
| 1300 | ISO | - | - | - | - | 19 mm | - | - | - |
| 1309 | ISO | - | - | - | - | - | 140 mm | - | - |
| 2205EEG15 | SNR | - | - | - | - | - | - | - | - |
| 2207-K+H307 | NKE | 1.1 | 19 mm | - | 9 mm | 90 mm | - | - | - |
| 2205K+H305 | ISO | - | 21.4 mm | - | - | - | - | 37.5 mm | - |
| 1310 | NSK | - | 6 mm | - | - | - | - | - | - |
| 2318K | NACHI | - | 7.5 mm | - | - | - | - | - | - |
| 2201EEG15 | SNR | - | - | - | - | - | - | - | - |
| GE 08 BBL | ISB | 3.5 | 50 mm | - | 14.5 mm | - | - | - | - |
| 2204K | NACHI | - | - | - | - | - | - | 44.5 mm | - |
| TSF 15 BB-E | ISB | - | - | - | - | 80 mm | - | - | - |
| 1205EKTN9+H205 | SKF | - | - | - | - | - | - | - | - |
| 2205SK | NTN | - | - | - | - | 35 mm | - | - | - |
| 2206KEEG15 | SNR | - | 25.4 mm | - | - | - | - | - | - |
| 2319 | ISB | - | - | - | - | - | 146 mm | - | 190 mm |
| 90 mm x 190 mm x 64 mm NACHI 2318K self aligning ball bearings | A1:23 mm; Weight:0.67 kg; d:25 mm; C:14 kN; E:15 mm; H:36.5 mm; Z:17.2 mm; C0:7.88 kN; S:7.5 mm; N:M10; Size (mm):90 mm x 190 mm x 64 mm ; |
| 15 mm x 35 mm x 14 mm FAG 2202-2RS-TVH self aligning ball bearings | d:40 mm; Fatigue limit load, Cu:0.81 kN; Nlim (grease):8,700 rpm; Da max:73.5 mm; Mass:0.37 kg; Brand:NTN; Radial clearance class:CN; Characteristic cage frequency, FTF:0.4 Hz; f0:14; Min operating temperature, Tmin:-20 °C; Size (mm):15 mm x 35 mm x 14 mm ; |
| Toyana 2209 self aligning ball bearings | ISO 355 reference:T3CC020; Db min:39 mm; T:15 mm; Cb min:3 mm; Dynamic load, C:25.1 kN; Ca min:3 mm; Max operating temperature, Tmax:120 °C; e:0.37; Characteristic cage frequency, FTF:0.42 Hz; Brand:SNR; |
| ISB TSM 12 BB self aligning ball bearings | Characteristic rolling element frequency, BSF:5.24 Hz; Radial clearance class:C3; Characteristic outer ring frequency, BPF0:4.08 Hz; ra max:1.5 mm; Mass:0.6 kg; B:21 mm; d1:67.1 mm; Static load, C0:29.3 kN; da max:67.1 mm; D:100 mm; |
| 20,000 mm x 52,000 mm x 15,000 mm SNR 1304G15 self aligning ball bearings | Y0:2.04; ra max:2.5 mm; da min:134 mm; k:8 mm; Da max:246 mm; rs min:3 mm; Characteristic rolling element frequency, BSF:5.33 Hz; Characteristic inner ring frequency, BPFI:9.42 Hz; Min operating temperature, Tmin:-40 °C; Radial clearance class:C4 Special; Size (mm):20,000 mm x 52,000 mm x 15,000 mm ; |
| 70 mm x 125 mm x 24 mm FAG 1214-K-TVH-C3 self aligning ball bearings | Da max:171 mm; ra max:2 mm; da min:129 mm; B:28 mm; Brand:NTN; Mass:2.07 kg; d:120 mm; Max operating temperature, Tmax:110 °C; Fatigue limit load, Cu:2.95 kN; Min operating temperature, Tmin:-25 °C; Size (mm):70 mm x 125 mm x 24 mm ; |
| 20 mm x 47 mm x 18 mm NACHI 2204K self aligning ball bearings | T min.:-40 °C; Designation of housing:PLE207-; s1:36.3 mm; d:35 mm; Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:EX207G2T04; A:44.5 mm; C0:15.2 kN; N1:21.5 mm; Weight:1.7 kg; Size (mm):20 mm x 47 mm x 18 mm ; |
| 40 mm x 80 mm x 23 mm NKE 2208 self aligning ball bearings | A:32 mm; S:6 mm; G:R1/8"; C0:4.78 kN; Designation of housing:FLZ203-; N:11,5mm; H:112.5 mm; s1:11 mm; J:90 mm; L:60.5 mm; Size (mm):40 mm x 80 mm x 23 mm ; |
| Toyana 11207 self aligning ball bearings | Grease Type:Unirex N2; Ring Size:Standard; Seal Type:Single Lip; Anti-Rotation Pin:Yes; Self Aligning:Self Centering; Bearing Duty:Intermediate Duty; d:1.0625 in; Housing Coating:Powder Coat; Flinger Material:None; Bearing Outer Ring Material:Steel; |
| 95 mm x 200 mm x 67 mm ISB 2319 self aligning ball bearings | N:17mm; H2:157 mm; T max.:100 °C; J:146 mm; s1:24.6 mm; L:190 mm; T min.:-40 °C; C0:20.8 kN; Recommended tightening torque for set screw:8 Nm; C:31.85 kN; Size (mm):95 mm x 200 mm x 67 mm ; |
| ISO 11205 self aligning ball bearings | S:25.4 mm; Designation of housing:FL213N-; Z:75.9 mm; G:M6x1; Weight:4.96 kg; A1:20 mm; d:65 mm; C:57.2 kN; H:258 mm; Designation of bearing:UC213G2L3; |
| 120 mm x 215 mm x 42 mm ISO 1224K+H3024 self aligning ball bearings | Designation of bearing:UC206-19G2L4; Recommended tightening torque for set screw:3.7 Nm; A2:40.2 mm; Z:44.4 mm; N:16mm; Weight:0.96 kg; G:M6x1; e:18 mm; C:19.5 kN; A1:13 mm; Size (mm):120 mm x 215 mm x 42 mm ; |
| 25 mm x 52 mm x 18 mm NTN 2205SK self aligning ball bearings | Static load, C0:3.6 kN; Characteristic cage frequency, FTF:0.37 Hz; ra max:0.6 mm; Characteristic rolling element frequency, BSF:3.68 Hz; Fatigue limit load, Cu:0.16 kN; D:35 mm; Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:2.61 Hz; Radial clearance class:CM; Min operating temperature, Tmin:-40 °C; Size (mm):25 mm x 52 mm x 18 mm ; |
| 110 mm x 240 mm x 50 mm FAG 1322-K-M-C3 self aligning ball bearings | L3:102 mm; Designation of bearing:UC212G2L3; C0:32.8 kN; s1:32.55 mm; A1:22 mm; H2:102 mm; L:194 mm; A5:39.7 mm; N1:32 mm; A2:42 mm; Size (mm):110 mm x 240 mm x 50 mm ; |
| 45 mm x 100 mm x 36 mm NKE 2309 self aligning ball bearings | Ship Weight:3.53 LB; Shaft Attachment (2):Grip Tight; Expansion Type:Non-Expansion; Grease Type:Unirex N2; Housing Type:Flange Bracket; Manufacturing Plant Location:Crossville, TN - DC; Bearing Insert Material:Steel; Bearing Family:Grip Tight Ball Bear; Retainer Type:Std Retainer; Bearing Series:207 Series; Size (mm):45 mm x 100 mm x 36 mm ; |
| 45 mm x 85 mm x 58 mm NKE 11209 self aligning ball bearings | Recommended tightening torque for set screw:8 Nm; D:85 mm; SW:3.97 mm; d:42.86 mm; m:6.5 mm; S:21.4 mm; C1:6.8 mm; d1:62 mm; T max.:100 °C; C0:20.8 kN; Size (mm):45 mm x 85 mm x 58 mm ; |
ISO 31000 - Wikipedia
ISO 31000 is a family of standards relating to risk management codified by the International Organization for Standardization. The purpose of ISO 31000:2018 is
ISO TS 10303-1300 : 2004(R2018) | INDUSTRIAL
Jan 1, 2004 - Buy ISO TS 10303-1300 : 2004(R2018) INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION
Pedaltrain Spark ISO-1300 - Drop-D Sounds
Reference: PT-SPARK ISO 1300. Manufacturer: Pedaltrain. Condition: New. Spark is an ultra thin 5 output power supply designed to fit and move between all
ISO/TS 10303-1300:2004 - Industrial automation ... - ISO
ISO/TS 10303-1300:2004. Industrial automation systems and integration — Product data representation and exchange — Part 1300: Application module: Work
Risk Management and ISO 31000 - SlideShare
Jul 3, 2011 - An overview of the ISO 31000 standard for risk management
ISO 12095:1994 - Seamless and welded steel tubes for ... - ISO
ISO 12095:1994. Seamless and welded steel tubes for pressure purposes — Liquid penetrant testing. This standard has been revised
ISO 31000 — Risk management - ISO
That’s why we’ve developed ISO 31000 for risk management. ... In a world of uncertainty, ISO 31000 is tailor-made for any organization seeking clear guidance on risk management. ... ISO 31000, Risk management – Guidelines, provides principles, a framework and a process for managing risk
Cybersecurity standards - Wikipedia
Cybersecurity standards are techniques generally set forth in published materials that attempt ... ISO/IEC 27001, part of the growing ISO/IEC 27000 family of standards, is an information security ... The most widely recognized modern NERC security standard is NERC 1300, which is a modification/update of NERC 1200
10 mm x 35 mm x 11 mm ISO 1300 self aligning ball bearings Video