| No. | Brand | k | S | d | F | E | f | C | N |
| 23288 CAK/W33 | SKF | - | - | 70 mm | 80 mm | - | - | - | - |
| 240/800-MB-W33 | NKE | - | - | 25 | - | - | - | - | - |
| 22340-E1-K + H2340 | FAG | - | - | - | - | - | - | - | - |
| 23236 EKW33+AH3236 | ISB | - | - | - | - | - | - | - | 14mm |
| 23218 K | ISB | - | - | - | - | - | - | - | - |
| CPM2441 XD | SKF | - | - | - | - | - | - | - | - |
| 24156-E1-K30 + AH24156 | FAG | - | - | 10 mm | - | - | - | - | - |
| 23136 EKW33+AH3136 | ISB | - | - | - | - | - | - | - | - |
| 22230MBW33 | AST | - | - | - | - | - | - | - | - |
| 22220 EKW33+H320 | ISB | - | - | - | - | - | - | 12.8 kN | 19mm |
| 23132-E1-TVPB | FAG | - | - | - | - | - | - | - | - |
| 23034MW33 | Toyana | - | - | 0.8750 in | - | - | - | - | - |
| 20230 K | ISO | - | - | 65 | - | - | - | - | - |
| TL23952CAE4 | NSK | - | - | - | - | - | - | - | - |
| 240/900 ECA/W33 | SKF | - | 14.3 mm | - | - | - | - | 14 kN | - |
| 230/630 KCW33+H30/630 | ISO | - | - | 31.75 mm | - | - | - | - | 14mm |
| 23180-E1A-K-MB1 + H3180-HG | FAG | - | - | - | - | - | - | 12.8 kN | - |
| 22309C | AST | - | - | 25 mm | - | - | - | - | - |
| 240/560 K30 | ISB | - | - | - | - | - | - | - | - |
| 222S.407 | FAG | - | - | - | - | - | - | - | - |
| 22228SWRCDg2E4 | NSK | - | - | - | - | - | - | - | - |
| 22332-2CS5K/VT143 | SKF | - | - | - | - | - | - | - | - |
| 23168 KCW33+AH3168 | ISO | - | - | - | - | - | - | - | - |
| 22334 CCK/W33 | SKF | - | - | 60 | - | - | - | - | - |
| 24168R | KOYO | - | - | - | - | - | - | - | - |
| 230/1000 EKW33+AOH30/1000 | ISB | - | - | - | - | - | - | - | - |
| 160 mm x 270 mm x 86 mm FAG 23132-E1-TVPB spherical roller bearings | Width T(mm):70; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Seals:VV (Non-Contact Rubb; Flange O.D. H(φ):104; Number of Bearings:Double; Volume Discount:Available; Housing Material:1045 Carbon Steel; Bearing Material:[Steel] Steel; Holder Surface Treatment:Black Oxide Coating; Size (mm):160 mm x 270 mm x 86 mm ; |
| Toyana 231/750 CW33 spherical roller bearings | C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:23600 lbf; d:2.2500 in; G2 - Heat Generation Factor (Rib-Roller End):21; Da - Cup Frontface Backing Diameter:4.96 in; Cg - Geometry Factor12:0.0814; Bearing Weight:14.36 lb; Cage Type:Stamped Steel; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:13600 lbf; C - Double Cup Width:3.0000 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:8420 lbf; |
| 340 mm x 620 mm x 224 mm FAG 23268-B-K-MB+H3268 spherical roller bearings | d:25 mm; Designation of bearing:UC305G2L3; Recommended tightening torque for set screw:5.5 Nm; G:M6x1; H:150 mm; C:22.36 kN; T max.:100 °C; e:16 mm; A2:39 mm; C0:11.5 kN; Size (mm):340 mm x 620 mm x 224 mm ; |
| 50 mm x 110 mm x 27 mm ISO 21310 KCW33+AH310 spherical roller bearings | L1:62 mm; A:70 mm; H2:157 mm; d:41.28 mm; C0:20.8 kN; s1:20.6 mm; N:17mm; T max.:100 °C; Designation of bearing:US209-26G2T04; Z:70.2 mm; Size (mm):50 mm x 110 mm x 27 mm ; |
| 45 mm x 100 mm x 42 mm SKF BS2-2309-2RS/VT143 spherical roller bearings | Housing Width:6.5 in; Seal Type:Viton Single Lip; Cr - Dynamic Load Rating:94869 lbf; Bearing Type:Split Cylindrical Re; Dimension H:160 mm; Maximum Speed:1570 rpm; Dimension J:450 mm; Ca - Axial Load Rating:5799.99 lbf; Bearing UPC:013992059086; Cor - Static Load Rating:131513 lbf; Size (mm):45 mm x 100 mm x 42 mm ; |
| 90 mm x 160 mm x 40 mm ISB 22218 K spherical roller bearings | Characteristic inner ring frequency, BPFI:16.94 Hz; Precision class:P0; Fw:48 mm; k:3 mm; Lubrication hole on outer ring:Oui/Yes; Max operating temperature, Tmax:120 °C; Nlim (grease):4,200 rpm; Lw:13.8 mm; Brand:NTN; rs min:0.6 mm; Size (mm):90 mm x 160 mm x 40 mm ; |
| 170 mm x 300 mm x 96 mm ISB 23136 EKW33+AH3136 spherical roller bearings | A1:12.5 mm; T max.:100 °C; Designation of bearing:EX207-20G2; Recommended tightening torque for set screw:8 Nm; C0:15.2 kN; L:118 mm; d1:51.1 mm; s1:36.3 mm; B:37.6 mm; Designation of housing:FE207-; Size (mm):170 mm x 300 mm x 96 mm ; |
| 800 mm x 1150 mm x 345 mm NKE 240/800-MB-W33 spherical roller bearings | Outer Ring Shape:Flat; Bearing Style:Open Type; D:52; Rolling Element Material:Steel; Inner/Outer Ring Material:Steel; Specifications/Environment:Standard; Precision:Grade 4; d:25; Size (mm):800 mm x 1150 mm x 345 mm ; |
| AST 24136CK30 spherical roller bearings | C0 - Static Radial Rating:46400 lbf; Ab - Cage-Cone Frontface Clearance:0.1 in; K - Factor8:1.34; Cage Type:Stamped Steel; G2 - Heat Generation Factor (Rib-Roller End):139; C1 - Dynamic Radial Rating (1 million revolutions)6:23700 lbf; Cone Part Number:L624549; Design Units:Imperial; da - Cone Frontface Backing Diameter:5 in; G1 - Heat Generation Factor (Roller-Raceway):195; |
| 280 mm x 460 mm x 180 mm Timken 24156YMB spherical roller bearings | B1:30.9 mm; L:68 mm; C0:7.88 kN; C:14 kN; J1:51 mm; A:27 mm; H:125 mm; B:21.4 mm; Z:48.2 mm; Recommended tightening torque for set screw:5.5 Nm; Size (mm):280 mm x 460 mm x 180 mm ; |
| 300 mm x 717,55 mm x 243 mm FAG Z-562658.04.DRGL spherical roller bearings | Bolt Hole Length N1:21.00 mm; Locking Style:Adapter Sleeve Locki; Housing Style:Two-Bolt Pillow Bloc; Bearing Unit - Adapter Sleeve:UK207 - H2307; Dimension L1:46.50 mm; Center of Bearing from End Y:24 mm; Bolt Hole Spacing J:127.00 mm; Static Load Rating:3462 lbf; Weight:3.9 lb; Shaft Size d:30 mm; Size (mm):300 mm x 717,55 mm x 243 mm ; |
| 260 mm x 580 mm x 175 mm ISB 22356 EKW33+AOH2356 spherical roller bearings | Bearing Number:MSM85BX; Bearing Type:Split Cylindrical Ex; Bearing UPC:013992035400; Dimension L:16.5 in; Shaft Size:85 mm; Seal Type:Felt Type; Bearing - Housing - Seal:MSM85BXH; Weight:76 lb; Pillow/Plummer Block Style:Split Cylindrical Ho; Series Type:Medium Series; Size (mm):260 mm x 580 mm x 175 mm ; |
| 80 mm x 170 mm x 58 mm ISO 22316 KCW33+AH2316 spherical roller bearings | Days to Ship:8 Days; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Housing Material:304 Stainless Steel; Bearing Part Number:608; Width T(mm):35; Flange O.D. H(φ):47; Bearing Retained:No; Type:Bearings with Housin; Size (mm):80 mm x 170 mm x 58 mm ; |
| 150 mm x 225 mm x 75 mm FAG 24030-E1-K30 + AH24030 spherical roller bearings | Shaft Size Type:Imperial; Shaft Size :5 in; Dimension E:7.000 in; Pre Install Clearance Min:0.0063 in; Shaft Tolerance:0.0050 in; Dimension RV:0.72 in; Full Timken Part Number:99999B; Dimension D:11.190 in; Oil Lubrication - M/N Seal:650 rpm; Dimension SV:5.82 in; Size (mm):150 mm x 225 mm x 75 mm ; |
| Toyana 24152 K30CW33+AH24152 spherical roller bearings | D:22; Cam Follower Type:Standard; Category:Cam Followers; Basic Load Rating Cr (Dynamic)(kN):5.33; Thread Size on Cam Follower (M)(mm):M10; RoHS:6; Volume Discount:Available; B:12; Roller Lining:None; |
| 140 mm x 250 mm x 68 mm NSK 22228SWRCDg2E4 spherical roller bearings | Volume Discount:Available; Bearing Part Number:623; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Days to Ship:7 Days; Flange Shape:Compact Type; Flange O.D. H(φ):33; Size (mm):140 mm x 250 mm x 68 mm ; |
Spherical roller bearings - - medias - Schaeffler
We are continually developing INA and FAG products further - for your benefit. Unfortunately you ... Product 23128-E1A-K-M has now been renamed. The new
FAG (Schaeffler) - 23128-E1A-K-M-C3 - Motion Industries
Buy FAG (Schaeffler) Spherical Roller Bearings 23128-E1A-K-M-C3 direct from Motion Industries. Your proven service leader with reliable delivery since 1972
23128-E1A-XL-K-M-C3 FAG • ABF Store
23128-E1A-XL-K-M-C3 FAG
23128-E1A-K-M FAG Spherical Roller - Quality Bearings Online
Product: 23128-E1A-K-M FAG Spherical Roller Bearing |Brand: FAG |Size: 140x225x68 |In Stock |All Orders Shipped via DHL |Quality Bearings Online LTD
FAG BEARING 23128-E1A-K-M-C3 Spherical Roller Bearings
title 23128-E1A-K-M-C3 price $ 1104.44 / each Category Spherical Roller Bearings UNSPSC 31171510 Harmonized Tariff Code 84823080 Manufacturer Name
FAG (Schaeffler) 23128-E1A-KM-C3 - Spherical Roller Bearing
FAG (Schaeffler) 23128-E1A-K-M-C3 - Spherical Roller Bearing - 140 mm ID, 225 mm OD, 68 mm Width, Tapered 1: 12 Bore, Open, Brass Cage
Bearing 23128-E1A-K-M + AHX3128 (FAG) | Size and
Spherical roller bearings 23128-E1A-K-M + AHX3128 dimensions and specification
23128-E1A-K-M FAG • ABF Store
23128-E1A-K-M FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
140 mm x 225 mm x 68 mm FAG 23128-E1A-K-M spherical roller bearings Video