| No. | Brand | a | J | h | E | M | D | K | S |
| NB1.25.0455.200-1PPN | ISB | - | - | - | - | 2 mm | - | - | - |
| XW4 | INA | - | - | - | - | - | - | - | - |
| 51316 | AST | - | - | - | - | - | - | - | 4.763 mm |
| 53230 | ISO | - | - | - | - | - | 520 mm | 5 mm | - |
| ZKLF50115-2Z | INA | - | - | - | - | - | - | 7.5 mm | - |
| 207TAD20 | NACHI | - | - | - | - | - | - | - | - |
| VSA 20 0414 N | INA | - | - | - | - | - | - | - | - |
| 52204 | FAG | - | - | - | - | - | 460 mm | - | - |
| 51214 | ISB | 18 mm | - | - | - | - | 90 mm | - | - |
| 2911 | INA | - | - | 52.388 mm | - | - | - | - | 4.763 mm |
| BSB045075-T | FAG | - | - | - | - | - | - | - | - |
| VA 16 0302 N | INA | - | - | - | - | - | - | - | - |
| NUP 317 ECP | SKF | - | - | - | 403 mm | - | 420 mm | - | - |
| 53436 | NACHI | - | - | - | - | - | - | 15 mm | - |
| 52330 | NACHI | - | - | - | - | - | - | - | - |
| ZB2.22.0885.400-1SPPN | ISB | - | - | - | - | - | 36.9 mm | - | - |
| 53415 M U | ISB | - | - | - | - | - | - | - | - |
| 234417 | ISO | - | - | - | - | - | 580 mm | - | - |
| 51215 | AST | - | - | - | - | - | - | - | - |
| NU 19/560 ECMA | SKF | - | - | - | - | - | - | 4 mm | - |
| ZKLN0619-2Z | INA | - | - | - | - | - | - | - | - |
| N 304 ECP | SKF | - | - | - | - | - | - | - | - |
| 511/560 M | ISB | - | - | 39.688 mm | - | - | - | - | - |
| 51236M | AST | - | - | - | - | - | - | - | - |
| 562044 | NTN | - | - | - | - | - | - | - | - |
| ZB1.25.1155.200-1SPTN | ISB | - | - | - | - | - | - | - | - |
| 52244 | NACHI | - | - | - | - | - | 500 mm | - | - |
| 54214U+U214 | Toyana | - | - | - | - | - | - | - | - |
| ISB NK.22.0880.100-1N thrust ball bearings | Dw:2 mm; Lw:6.3 mm; Mass needle roller:0.16 g; r1,2 min.:0.2 mm; r2 max.:0.8 mm; r1 max.:0.6 mm; |
| INA 910 thrust ball bearings | Fatigue load limit Pu:10.2 kN; Basic dynamic load rating C:41.8 kN; Ew:58 mm; Basic static load rating C0:81.5 kN; Fw:50 mm; U:25 mm; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 50x58x4; Reference speed:8000 r/min; Designation associated G design radial shaft seal with a low cross-sectional height:G 50x58x4; Limiting speed:9000 r/min; |
| NKE 53305+U305 thrust ball bearings | Limiting speed:16000 r/min; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 28x35x4; Basic dynamic load rating C:22.9 kN; Fatigue load limit Pu:4.15 kN; Reference speed:14000 r/min; Mass needle roller and cage assembly:0.027 kg; Designation associated G design radial shaft seal with a low cross-sectional height:G 28x35x4; Fw:28 mm; Ew:35 mm; Basic static load rating C0:34.5 kN; |
| ISB NB1.25.0855.200-1PPN thrust ball bearings | Bearing designation:16017 ; Oil:5 600 min-1; da:89 min; rs:0.6 mm; Weight:0.626 kg; Pu:1.442 kN; Grease:4 700 min-1; Dynamic (Cr):34.100 kN; Static (Cor):32.900 kN; ra:0.6 max; |
| AST 51222 thrust ball bearings | Associated eyebolt for handling:M 10; G:Tr 480x5; b:36 mm; B3:12 mm; d2:503 mm; d1:530 mm; Mass lock nut:26 kg; B5:77 mm; Associated spanner:TMFN 80-500; d3:560 mm; |
| INA XW4 thrust ball bearings | Bearing:22324 CC/W33; P60°:230 kN; Taconite seal (dc shaft position):TER 119; P180°:96.1 kN; Pa:62.3 kN; Lock nut:AN 24; A2:279.4 mm; J1:95.25 mm; PG:1/4 NPT; R2:39.688 mm; |
| Toyana 54214U+U214 thrust ball bearings | A1:107.156 mm; da:88.9 mm; H2:57.15 mm; d2:130.175 mm; B:102.394 mm; J max.:282.575 mm; H1:95.25 mm; J min.:234.95 mm; H:192.088 mm; Limiting speed:2300 r/min; |
| FAG 51110 thrust ball bearings | Db max.:165 mm; da max.:127.9 mm; d:110 mm; Preload class A GA:420 N; Ball diameter Dw:19.05 mm; Preload class B GB:840 N; D2:155.15 mm; B:28 mm; d2:128.5 mm; d1:128.5 mm; |
| 45 mm x 75 mm x 15 mm FAG BSB045075-T thrust ball bearings | Static axial stiffness, preload class B:156 N/µm; Reference grease quantity Gref:4.1 cm³; rb max.:0.6 mm; Preload class A GA:130 N; Calculation factor f2B:1.03; Calculation factor e:0.68; Calculation factor (back-to-back, face-to-face) Y2:1.41; Attainable speed for grease lubrication:23000 r/min; Static axial stiffness, preload class A:104 N/µm; Da max.:75.4 mm; Size (mm):45 mm x 75 mm x 15 mm ; |
| 95 mm x 145 mm x 60 mm FAG 234419-M-SP thrust ball bearings | Da max.:428 mm; da max.:341 mm; ra max.:3.5 mm; r1,2 min.:3.5 mm; T:85.725 mm; Db min.:428 mm; Dimension series:HM 259000; Calculation factor Y0:1; a:80 mm; Calculation factor e:0.33; Size (mm):95 mm x 145 mm x 60 mm ; |
| KOYO 53205 thrust ball bearings | G:M 42x3; h:163 mm; Specific dynamic load factor K:100 N/mm²; d:45 mm; Material constant KM:330; l2 max.:217 mm; B:32 mm; C1 max.:28 mm; r1 min.:0.6 mm; l1 min.:92 mm; |
| ISO 51148 thrust ball bearings | Bearing limiting speed:3800 r/min; J min.:263.525 mm; R1:60.325 mm; Initial grease fill:141.75 g; S:4.763 mm; Adapter sleeve assembly:SNW 118x3.1/4; Appropriate attachment bolt size G:0.625 in; P90°:60.9 kN; Cap bolt, SAE grade:5; PG:1/8 NPT; |
| ISB ZB1.20.0844.201-2SPTN thrust ball bearings | J min.:295.275 mm; H:217.488 mm; H1:114.3 mm; Appropriate attachment bolt size G:0.75 in; Adapter sleeve assembly:SNW 20x3.3/8; Cap bolt recommended tightening torque:203.4 N·m; P120°:44.5 kN; R1:58.737 mm; Cap bolt:2 x 3/4-10 UNC; A1:111.125 mm; |
| AST 51313 thrust ball bearings | C:12 mm; da max.:24 mm; B:24 mm; ra max.:0.3 mm; b:3.1 mm; d:20 mm; r2 min.:0.3 mm; Basic static load rating C0:146 kN; b1:3.1 mm; rb max.:0.3 mm; |
| 70 mm x 105 mm x 10 mm NSK 52214 thrust ball bearings | Basic dynamic load rating C:1760 kN; da min.:187 mm; ra max.:3 mm; db max.:198 mm; s max.:7 mm; Fatigue load limit Pu:236 kN; Mass bearing:59.5 kg; D:360 mm; Basic static load rating C0:2450 kN; Da max.:342 mm; Size (mm):70 mm x 105 mm x 10 mm ; |
| 20 mm x 47 mm x 15 mm NSK 20TAC47BDDG thrust ball bearings | PG:1/4 NPT; P150°:236 kN; Initial grease fill:2749.95 g; H1:241.3 mm; ba:90.487 mm; Max. speed for Taconite seal:385 r/min; J max.:708.025 mm; RG:1 NPT; Cap bolt recommended tightening torque:4284.4 N·m; da:190.5 mm; Size (mm):20 mm x 47 mm x 15 mm ; |
Bearing 956 (INA) | Size and Specification | Bearings Online
Axial deep groove ball bearings 956. Bearing number : 956. Size (mm) : 280x400x95. Brand : INA. Bore Diameter (mm) : 280. Outer Diameter (mm) : 400
INA - 956 Bearing - Central African Republic - Buyer
INA 956 Bearing Description. HZS Bearing Co.Ltd specializes in selling INA 956 bearings, INA 956 bearing related information: Model: 956 Bearing; Brand: INA
SMC INA-13-956-A regulator, AR REGULATOR
Availability: Available to Ship in 7 Days: 189 qty *All orders available to ship today or ship tomorrow must be received by 3pm PST. We ship Monday through
INA 956 Thrust ball bearing | 956 Bearing
Brand Name: INA. Model Number: 956. EAN: 0692314649848. Product Group: B00308. Keyword String: Ball Deep Groove. Enclosure: 2 Seals. Minimum Buy
Area code 956 - Wikipedia
North American area code 956 is a state of Texas telephone area code for numbers in the Brownsville, McAllen, Laredo and South Padre Island areas. It was created May 25, 1997, in a split from area code 210
18 U.S. Code § 956 - Conspiracy to kill, kidnap, maim, or
18 U.S. Code § 956. Conspiracy to kill, kidnap, maim, or injure persons or damage property in a foreign country. U.S. Code; Notes. prev | next. (a). (1). Whoever
SMC Corporation - INA-13-956-A - Regulator - Allied
INA-13-956-A from SMC Corporation at Allied Electronics & Automation
SMC INA-13-956-A regulator - Automation Distribution
SKU: INA-13-956-A; Availability: Call 1-888-600-3080 for availability and lead time. SMC INA-13-956-A regulator. MSRP: Now: $53.10. Was: — You save
INA 956 thrust ball bearings Video