| No. | Brand | a | J | h | E | M | D | K | S |
| GT33 | INA | 3.969 mm | 104.775 mm | - | - | - | - | - | - |
| 53324 | NACHI | - | - | - | - | - | - | - | - |
| VA 16 0302 N | INA | - | - | - | - | - | - | - | - |
| 234419-M-SP | FAG | 80 mm | - | - | - | - | - | - | - |
| 53203 | NKE | - | - | - | - | - | - | - | - |
| 54411 | NACHI | - | - | - | - | - | - | - | - |
| 54234 | Toyana | - | - | - | - | - | - | - | - |
| XW4 | INA | - | - | - | - | - | - | - | - |
| 53305+U305 | NKE | - | - | - | - | - | - | - | - |
| XW5-1/2 | INA | - | - | - | - | - | - | - | - |
| 7602045-TVP | FAG | - | - | - | - | - | 215 mm | - | - |
| 200TAC29D+L | NSK | - | - | - | - | - | - | - | 4.763 mm |
| 25TAF06 | NACHI | - | - | - | - | - | 310 mm | - | - |
| 51206 | AST | - | - | - | - | - | 546.1 mm | - | - |
| NUP 244 ECML | SKF | - | - | - | - | - | 250 mm | - | - |
| NB1.20.0744.200-1PPN | ISB | - | - | - | - | - | - | - | - |
| 51409 | ISB | - | - | - | - | - | 679.45 mm | - | - |
| 52324-MP | NKE | - | - | - | - | - | - | - | - |
| 51109 | Toyana | - | - | - | - | - | - | - | - |
| EB1.25.1355.200-1STPN | ISB | 14 mm | - | - | - | - | 62 mm | - | - |
| NU 10/710 ECMA | SKF | 4.5 mm | - | - | - | - | - | - | - |
| ZKLF50115-2Z | INA | - | - | - | - | - | - | 7.5 mm | - |
| ZB1.25.1155.200-1SPTN | ISB | - | - | - | - | - | - | - | - |
| 956 | INA | - | - | - | - | - | - | - | 4.763 mm |
| 81214 | NTN | - | - | - | - | - | - | - | - |
| 52214 | NSK | - | - | - | - | - | 360 mm | - | - |
| ISB EBL.30.1055.200-1STPN thrust ball bearings | D:580 mm; rs (min):5 mm; Pu:4240 kN; Grease:7080 kN; Static (Cor):22.3 mm; d:340 mm; with cylindrical bore:600 min-1; Dynamic (Cr):12 mm; Oil:532.770 kN; with tapered bore:750 min-1; |
| 30 mm x 68 mm x 9 mm FAG 52208 thrust ball bearings | ba:52.388 mm; Da:190 mm; Cap bolt recommended tightening torque:515.2 N·m; P90°:77 kN; A1:111.125 mm; Housing:SAF 618; RG:3/8 NPT; J max.:342.9 mm; Appropriate attachment bolt size G:0.75 in; Cap bolt, SAE grade:8; Size (mm):30 mm x 68 mm x 9 mm ; |
| INA XW5-1/2 thrust ball bearings | Calculation factor Y2:3.9; ra max.:3 mm; Calculation factor Y1:2.6; B4:29.5 mm; Limiting speed:2600 r/min; b:16.7 mm; Mass bearing + sleeve:38.2 kg; Basic dynamic load rating C:1237 kN; da max.:213 mm; B:86 mm; |
| NKE 53220+U220 thrust ball bearings | H:137.5 mm; J min.:179 mm; Basic static load rating C0:36 kN; A1:42 mm; Basic dynamic load rating C:52.7 kN; Recommended diameter for attachment bolts, inch G:0.625 in; N1:18 mm; Limiting speed:3400 r/min; J max.:202 mm; Mass bearing unit:4.6 kg; |
| NACHI 53436 thrust ball bearings | D1 ≈:828 mm; K:15 mm; Reference speed:20 r/min; Basic dynamic load rating C:9307 kN; Calculation factor e:0.3; Calculation factor Y1:2.3; da min.:658 mm; Fatigue load limit Pu:1180 kN; ra max.:6 mm; d2 ≈:718 mm; |
| 100 mm x 180 mm x 46 mm SKF NU 2220 ECM thrust ball bearings | Da max.:226 mm; r1,2 min.:3 mm; Calculation factor e:0.33; Basic static load rating C0:1120 kN; Reference speed:2000 r/min; Ba min.:7 mm; B1:105 mm; K:7.5 mm; Limiting speed:2800 r/min; B:80 mm; Size (mm):100 mm x 180 mm x 46 mm ; |
| 30 mm x 72 mm x 27 mm SKF NU 2306 ECP thrust ball bearings | B:7.5 mm; r1,2 min.:1 mm; Mass shaft washer:0.2 kg; d1:78 mm; d:40 mm; Size (mm):30 mm x 72 mm x 27 mm ; |
| 100 mm x 210 mm x 123 mm NKE 52324-MP thrust ball bearings | d:150 mm; Lock washer:W 30; d1:133.35 mm; Threads per inch:12; B:24.867 mm; G:149.555 mm; d3 max.:195.402 mm; Lock nut:AN 30; B1:107.467 mm; Hydraulic nut:HMVC 30E; Size (mm):100 mm x 210 mm x 123 mm ; |
| NACHI 53248 thrust ball bearings | P150°:185 kN; Ca:107.798 mm; Cap bolt recommended tightening torque:2467.6 N·m; N1:34.925 mm; R1:122.237 mm; PosiTrac Plus contact element:2 x B10724-159; Adapter sleeve assembly:SNW 40x7.3/16; S:4.763 mm; L:749.3 mm; J1:127 mm; |
| INA HW1/2 thrust ball bearings | d:75 mm; B:35 mm; r, r1,2 min.:1 mm; Mass inner ring:0.34 kg; F:85 mm; |
| 50 mm x 110 mm x 27 mm NACHI 50TAF11 thrust ball bearings | B:55 mm; dk:105 mm; l3 min.:85 mm; l5 ≈:45 mm; G:M 64x4; d4 ≈:105 mm; Material constant KM:330; Specific dynamic load factor K:100 N/mm²; Basic static load rating C0:655 kN; w:90 mm; Size (mm):50 mm x 110 mm x 27 mm ; |
| Toyana 54234 thrust ball bearings | PG:1/4 NPT; P120°:66.7 kN; R1:73.025 mm; A1:120.65 mm; N1:24.209 mm; Adapter sleeve assembly:SNW 3026x4.1/2; Initial grease fill:232.47 g; Housing:SAFS 026 KA; PosiTrac Plus contact element:2 x B10724-117; Mass pillow block:50.8 kg; |
| NACHI 53324 thrust ball bearings | L:190.5 mm; Bearing limiting speed:12000 r/min; RG:1/8 NPT; R2:12.7 mm; da:28.575 mm; Pa:2.4 kN; End plug (suffix Y):EPR 2; P90°:11.1 kN; P60°:18.2 kN; Stabilizing ring:36053-6; |
| INA XW4 thrust ball bearings | Bearing:22324 CC/W33; P60°:230 kN; Taconite seal (dc shaft position):TER 119; P180°:96.1 kN; Pa:62.3 kN; Lock nut:AN 24; A2:279.4 mm; J1:95.25 mm; PG:1/4 NPT; R2:39.688 mm; |
| NKE 511/530-FP thrust ball bearings | r1,2 min.:7.5 mm; Mass bearing:1073 kg; D:1220 mm; d:850 mm; Da max.:1192 mm; Fatigue load limit Pu:1430 kN; B:272 mm; Basic dynamic load rating C:11600 kN; ra max.:6 mm; Da min.:1077 mm; |
| ISB EB1.25.1355.200-1STPN thrust ball bearings | r1s (min):1 mm; a:14 mm; Static (Coa):42.8 kN; C:14 mm; T:17.25 mm; D:62 mm; rs (min):1 mm; B:16 mm; Pu:5.220 kN; Dynamic (Ca):39.3 kN; |
ISO 54315 thrust ball bearings - 54315 bearing - Dacheng
The online ISO 54315 thrust ball bearings parts store gives you immediate TIMKEN Manufacturer Name access to a selection of more than 1.4 million new, used,
ISO 54315 thrust ball bearings - 54315 bearing
Product Details. ISO 54315 thrust ball bearings. Brand Name, ISO. Model Number, 54315. Min.Order Quantity, 1 pcs. Price, Negotiable. Product Features
ISO 54315 thrust ball bearings - 54315 bearing
ISO 54315 thrust ball bearings with easy-to-use parts graphics, giving you the ability 399.009 mm G to check parts availability, SKF BEARING LTD. thrust ball
ISO 54315 Cojinetes De Bola 54315
ISO 54315 Cojinetes De Bola. Bearing No. 54315. Size. 77x135x87.2 mm. Bore Diameter. 77 mm. Outer Diameter. 135 mm. Width. 87,2 mm d. 77 mm d1
ISO 54315 thrust ball bearings - 54315 bearing - NTN Bearing
Brand Name: ISO. Model Number: 54315. a: 67.608 mm. Basic dynamic load rating C: 391 kN. Basic static load rating C0: 490 kN. d: 80 mm. r1,2 min.: 2.5 mm
Bearing 54315 (ISO) | Size and Specification | Bearings
Axial deep groove ball bearings 54315. Bearing number : 54315. Size (mm) : 77x135x87.2. Brand : ISO. Bore Diameter (mm) : 77. Outer Diameter (mm) : 135
ISO 54315 thrust ball bearings - 54315 bearing - SKF BEARING LTD
ISO 54315 thrust ball bearings with easy-to-use parts graphics, giving you the ability 399.009 mm G to check parts availability, SKF BEARING LTD. thrust ball
Axial deep groove ball bearings - 54315 + U315 - medias
Axial deep groove ball bearings 54315 + U315, main dimensions to DIN 711/ISO. Axial load in one direction Axial load in two directions Static angular error and
ISO 54315 thrust ball bearings Video